Pava Glass H40

Premix with propeller/shovel mixer component A (Base) and then add the second component B (reagent) and mix for a minimum of 3 minutes until the mixture is homogeneous as density and chromaticity.
Combine the different components, taking care to mix thoroughly by stirring at low speed in order to obtain a homogeneous colour mixture. It is recommended to take particular care when mixing all the mixture within the individual components; with the help of a spatula/knife scoop out the product from the walls/bottom of the pot in order to maintain the catalysis ratios.
Once the two components have been mixed, leave the perfectly homogeneous product inside the container to "rest" until the resin has warmed up slightly, i.e. 28-33°C, which can be measured with a laser thermometer (in conditions of 20-22°C and approx. 60% R.H. wait approx. 20-30 min before pouring). Before pouring the product wait for the air incorporated with the mixing to escape and for a sufficient induction time to elapse; this must be estimated in relation to the ambient and substrate conditions