Ultrapol
Transparent two-component polyurethane finish made with special solvent-based resins; suitably formulated to allow intense cross-linking, fast hardening and long pot-life. The product guarantees gloss and resistance to light (U.V.) with minimal yellowing and no chalking. It also offers good resistance to weathering and diluted chemicals.
VOC lim 500 g/l - real VOC < 420 g/l (excluding water).
Pre-mix component A (Base) with propeller/shovel mixer, then add the second component B (reagent) and mix for a minimum of 3 minutes until the mixture is homogeneous in density and colour.
Combine the different components, taking care to mix thoroughly by stirring at low speed in order to obtain a homogeneous colour mixture. It is recommended to take particular care when mixing all the mixture within the individual components; with the help of a spatula/knife, collect the product from the walls/bottom of the pot in order to maintain the catalysis ratios.
Observe particular care in the partial use of the 'Part B - reagent' package and its subsequent closure and re-opening for re-use. In order to preserve the contents, it is necessary to apply pressure to the can once it has been closed again in order to allow as much air to escape as possible, and then to turn the can upside down for 3 to 5 minutes: this promotes the formation of a film of product near the edge of the lid, which reacts with the moisture too.